Removal of fiber posts using conventional versus guided endodontics: a comparative study of dentin loss and complications.

OBJECTIVES: To compare the efficacy of fiber post removal using conventional (CONV) versus guided endodontics (GE) in terms of dentin loss, residual resin material, procedural errors, and working time in vitro. MATERIAL AND METHODS: Ninety human central incisors were root-filled and scanned by micro-computed tomography (CT), then restored with fiber posts and composite. Twenty-four sets of teeth with up to four human maxillary central incisors were fabricated and divided into three groups: conventional post removal by a general dentist (CG) or endodontology specialist (CS) and guided endodontics (GE) by a general dentist, yielding 30 teeth per operator and group. After treatment, the prepared access cavities were volumetrically assessed by micro-CT. Statistical significance was evaluated by one-way analysis of variance followed by post hoc comparisons with Tukey's HSD test and Pearson's chi-squared test for independence. RESULTS: Both CONV and GE resulted in dentin loss and residual resin material. CS resulted in more dentin loss and less residual resin material than CG and GE (p < .05). All groups had some deviations from the original root canal but no perforations. The shortest working time was observed in the GE group. CONCLUSIONS: Compared to the conventional freehand technique, GE resulted in significantly less radicular dentin loss, a few deviations but no perforations. CLINICAL RELEVANCE: Guided endodontics can improve the speed and safety of fiber post removal without root perforation.

[Microvascular changes in COVID-19]. / Mikrovaskuläre Veränderungen bei COVID-19.

BACKGROUND: Clinically, coronavirus disease 2019 (COVID-19) is associated with a wide range of symptoms, which can range from mild complaints of an upper respiratory infection to life-threatening hypoxic respiratory insufficiency and multiorgan failure. OBJECTIVE: The initially identified pulmonary damage patterns, such as diffuse alveolar damage in acute lung failure, are accompanied by new findings that draw a more complex scenario. These include microvascular involvement and a wide range of associated pathologies of multiple organ systems. A back-scaling of microstructural vascular changes is possible via targeted correlation of pathological autopsy results with radiological imaging. MATERIAL AND METHODS: Radiological and pathological correlation as well as microradiological imaging to investigate microvascular involvement in fatal COVID-19. RESULTS: The cases of two COVID-19 patients are presented. Patient 1 showed a relative hypoperfusion in lung regions that did not have typical COVID-19 infiltrates; the targeted post-mortem correlation also showed subtle signs of microvascular damage even in these lung sections. Patient 2 showed both radiologically and pathologically advanced typical COVID-19 destruction of lung structures and the case illustrates the damage patterns of the blood-air barrier. The perfusion deficit of the intestinal wall shown in computed tomography of patient 2 could not ultimately clearly be microscopically attributed to intestinal microvascular damage. CONCLUSION: In addition to microvascular thrombosis, our results indicate a functional pulmonary vasodysregulation as part of the pathophysiology during the vascular phase of COVID-19. The clinical relevance of autopsies and the integration of radiological imaging findings into histopathological injury patterns must be emphasized for a better understanding of COVID-19.

Free propagation phase-contrast breast CT provides higher image quality than cone-beam breast-CT at low radiation doses: a feasibility study on human mastectomies.

In this study we demonstrate the first direct comparison between synchrotron x-ray propagation-based CT (PB-CT) and cone-beam breast-CT (CB-CT) on human mastectomy specimens (N = 12) including different benign and malignant lesions. The image quality and diagnostic power of the obtained data sets were compared and judged by two independent expert radiologists. Two cases are presented in detail in this paper including a comparison with the corresponding histological evaluation. Results indicate that with PB-CT it is possible to increase the level of contrast-to-noise ratio (CNR) keeping the same level of dose used for the CB-CT or achieve the same level of CNR reached by CB-CT at a lower level of dose. In other words, PB-CT can achieve a higher diagnostic potential compared to the commercial breast-CT system while also delivering a considerably lower mean glandular dose. Therefore, we believe that PB-CT technique, if translated to a clinical setting, could have a significant impact in improving breast cancer diagnosis.

X-ray-Based 3D Virtual Histology-Adding the Next Dimension to Histological Analysis.

Histology and immunohistochemistry of thin tissue sections have been the standard diagnostic procedure in many diseases for decades. This method is highly specific for particular tissue regions or cells, but mechanical sectioning of the specimens is required, which destroys the sample in the process and can lead to non-uniform tissue deformations. In addition, regions of interest cannot be located beforehand and the analysis is intrinsically two-dimensional. Micro X-ray computed tomography (µCT) on the other hand can provide 3D images at high resolution and allows for quantification of tissue structures, as well as the localization of small regions of interest. These advantages advocate the use of µCT for virtual histology tool with or without subsequent classical histology. This review summarizes the most recent examples of virtual histology and provides currently known possibilities of improving contrast and resolution of µCT. Following a background in µCT imaging, ex vivo staining procedures for contrast enhancement are presented as well as label-free virtual histology approaches and the technologies, which could rapidly advance it, such as phase-contrast CT. Novel approaches such as zoom tomography and nanoparticulate contrast agents will also be considered. The current evidence suggests that virtual histology may present a valuable addition to the workflow of histological analysis, potentially reducing the workload in pathology, refining tissue classification, and supporting the detection of small malignancies.

Optimization of propagation-based x-ray phase-contrast tomography for breast cancer imaging.

The aim of this study was to optimise the experimental protocol and data analysis for in-vivo breast cancer x-ray imaging. Results are presented of the experiment at the SYRMEP beamline of Elettra Synchrotron using the propagation-based phase-contrast mammographic tomography method, which incorporates not only absorption, but also x-ray phase information. In this study the images of breast tissue samples, of a size corresponding to a full human breast, with radiologically acceptable x-ray doses were obtained, and the degree of improvement of the image quality (from the diagnostic point of view) achievable using propagation-based phase-contrast image acquisition protocols with proper incorporation of x-ray phase retrieval into the reconstruction pipeline was investigated. Parameters such as the x-ray energy, sample-to-detector distance and data processing methods were tested, evaluated and optimized with respect to the estimated diagnostic value using a mastectomy sample with a malignant lesion. The results of quantitative evaluation of images were obtained by means of radiological assessment carried out by 13 experienced specialists. A comparative analysis was performed between the x-ray and the histological images of the specimen. The results of the analysis indicate that, within the investigated range of parameters, both the objective image quality characteristics and the subjective radiological scores of propagation-based phase-contrast images of breast tissues monotonically increase with the strength of phase contrast which in turn is directly proportional to the product of the radiation wavelength and the sample-to-detector distance. The outcomes of this study serve to define the practical imaging conditions and the CT reconstruction procedures appropriate for low-dose phase-contrast mammographic imaging of live patients at specially designed synchrotron beamlines.

Microenvironmental interactions between endothelial and lymphoma cells: a role for the canonical WNT pathway in Hodgkin lymphoma.

The interaction between vascular endothelial cells (ECs) and cancer cells is of vital importance to understand tumor dissemination. A paradigmatic cancer to study cell-cell interactions is classical Hodgkin Lymphoma (cHL) owing to its complex microenvironment. The role of the interplay between cHL and ECs remains poorly understood. Here we identify canonical WNT pathway activity as important for the mutual interactions between cHL cells and ECs. We demonstrate that local canonical WNT signaling activates cHL cell chemotaxis toward ECs, adhesion to EC layers and cell invasion using not only the Wnt-inhibitor Dickkopf, tankyrases and casein kinase 1 inhibitors but also knockdown of the lymphocyte enhancer binding-factor 1 (LEF-1) and ß-catenin in cHL cells. Furthermore, LEF-1- and ß-catenin-regulated cHL secretome promoted EC migration, sprouting and vascular tube formation involving vascular endothelial growth factor A (VEGF-A). Importantly, high VEGFA expression is associated with a worse overall survival of cHL patients. These findings strongly support the concept that WNTs might function as a regulator of lymphoma dissemination by affecting cHL cell chemotaxis and promoting EC behavior and thus angiogenesis through paracrine interactions.

WNT5A: a motility-promoting factor in Hodgkin lymphoma.

Classical Hodgkin lymphoma (cHL) has a typical clinical manifestation, with dissemination involving functionally neighboring lymph nodes. The factors involved in the spread of lymphoma cells are poorly understood. Here we show that cHL cell lines migrate with higher rates compared with non-Hodgkin lymphoma cell lines. cHL cell migration, invasion and adhesion depend on autocrine WNT signaling as revealed by the inhibition of WNT secretion with the porcupine inhibitors Wnt-C59/IWP-2, but did not affect cell proliferation. While application of recombinant WNT5A or WNT5A overexpression stimulates HL cell migration, neither WNT10A, WNT10B nor WNT16 did so. Time-lapse studies revealed an amoeboid type of cell migration modulated by WNT5A. Reduced migration distances and velocity of cHL cells, as well as altered movement patterns, were observed using porcupine inhibitor or WNT5A antagonist. Knockdown of Frizzled5 and Dishevelled3 disrupted the WNT5A-mediated RHOA activation and cell migration. Overexpression of DVL3-K435M or inhibition of ROCK (Rho-associated protein kinase) by Y-27632/H1152P disrupted cHL cell migration. In addition to these mechanistic insights into the role of WNT5A in vitro, global gene expression data revealed an increased WNT5A expression in primary HL cells in comparison with normal B-cell subsets and other lymphomas. Furthermore, the activity of both porcupine and WNT5A in cHL cells had an impact on lymphoma development in the chick chorionallantoic membrane assay. Massive bleeding of these lymphomas was significantly reduced after inhibition of WNT secretion by Wnt-C59. Therefore, a model is proposed where WNT signaling has an important role in regulating tumor-promoting processes.

X-Ray based Lung Function measurement-a sensitive technique to quantify lung function in allergic airway inflammation mouse models.

In mice, along with the assessment of eosinophils, lung function measurements, most commonly carried out by plethysmography, are essential to monitor the course of allergic airway inflammation, to examine therapy efficacy and to correlate animal with patient data. To date, plethysmography techniques either use intubation and/or restraining of the mice and are thus invasive, or are limited in their sensitivity. We present a novel unrestrained lung function method based on low-dose planar cinematic x-ray imaging (X-Ray Lung Function, XLF) and demonstrate its performance in monitoring OVA induced experimental allergic airway inflammation in mice and an improved assessment of the efficacy of the common treatment dexamethasone. We further show that XLF is more sensitive than unrestrained whole body plethysmography (UWBP) and that conventional broncho-alveolar lavage and histology provide only limited information of the efficacy of a treatment when compared to XLF. Our results highlight the fact that a multi-parametric imaging approach as delivered by XLF is needed to address the combined cellular, anatomical and functional effects that occur during the course of asthma and in response to therapy.

Clinical application of low-dose phase contrast breast CT: methods for the optimization of the reconstruction workflow.

Results are presented of a feasibility study of three-dimensional X-ray tomographic mammography utilising in-line phase contrast. Experiments were performed at SYRMEP beamline of Elettra synchrotron. A specially designed plastic phantom and a mastectomy sample containing a malignant lesion were used to study the reconstructed image quality as a function of different image processing operations. Detailed evaluation and optimization of image reconstruction workflows have been carried out using combinations of several advanced computed tomography algorithms with different pre-processing and post-processing steps. Special attention was paid to the effect of phase retrieval on the diagnostic value of the reconstructed images. A number of objective image quality indices have been applied for quantitative evaluation of the results, and these were compared with subjective assessments of the same images by three experienced radiologists and one pathologist. The outcomes of this study provide practical guidelines for the optimization of image processing workflows in synchrotron-based phase-contrast mammo-tomography.

Efficacy of reciprocating and rotary NiTi instruments for retreatment of curved root canals assessed by micro-CT.

AIM: To compare the efficacy of reciprocating and rotary NiTi-instruments in removing filling material from curved root canals using micro-computed tomography. METHODOLOGY: Sixty curved root canals were prepared and filled with gutta-percha and sealer. After determination of root canal curvatures and radii in two directions as well as volumes of filling material, the teeth were assigned to three comparable groups (n = 20). Retreatment was performed using Reciproc, ProTaper Universal Retreatment or Hedström files. Percentages of residual filling material and dentine removal were assessed using micro-CT imaging. Working time and procedural errors were recorded. Statistical analysis was performed by variance procedures. RESULTS: No significant differences amongst the three retreatment techniques concerning residual filling material were detected (P > 0.05). Hedström files removed significantly more dentine than ProTaper Universal Retreatment (P < 0.05), but the difference concerning dentine removal between both NiTi systems was not significant (P > 0.05). Reciproc and ProTaper Universal Retreatment were significantly faster than Hedström files (P = 0.0001). No procedural errors such as instrument fracture, blockage, ledging or perforation were detected for Hedström files. Three perforations were recorded for ProTaper Universal Retreatment, and in both NiTi groups, one instrument fracture occured. CONCLUSIONS: Remnants of filling material were observed in all samples with no significant differences between the three techniques. Hedström files removed significantly more dentine than ProTaper Universal Retreatment, but no significant differences between both NiTi systems were detected. Procedural errors were observed with ProTaper Universal Retreatment and Reciproc.

Comparison of hand and rotary instrumentation for removing gutta-percha from previously treated curved root canals: a microcomputed tomography study.

AIM: To compare the efficacy of hand and rotary nickel-titanium (NiTi) instruments in removing filling material from curved root canals of root filled teeth with unknown preparation parameters. METHODOLOGY: Ninety mandibular molars with root fillings in curved root canals and homogenous root canal filling extending to 0-2 mm short of the radiographic apex were selected. Root canal curvatures and radii were measured in two directions and microcomputed tomography (micro-CT) scans were used to determine preoperative volumes of the filling material. Subsequently, the teeth were assigned to two identical groups (n = 14). The root fillings were removed with Hedström files or FlexMaster NiTi rotary instruments. Postoperative micro-CT imaging was used to assess the percentage of residual filling material as well as the amount of dentine removal. Working time and procedural errors were recorded. Data were compared using analysis of covariance and analysis of variance procedures. RESULTS: Root canals retreated with Hedström files were associated with less remaining filling material compared with FlexMaster instruments (P < 0.05). Both retreatment techniques removed similar amounts of dentine with no significant differences (P > 0.05). FlexMaster instruments were significantly faster than Hedström files (P < 0.05). No procedural errors were detected in the Hedström group, whilst three instruments fractured in the FlexMaster group. CONCLUSIONS: Hand instrumentation resulted in significantly less residual filling material than retreatment with rotary NiTi instruments. Dentine removal was not significantly different for both techniques. FlexMaster NiTi rotary files were significantly faster than Hedström files, but were associated with a higher risk of instrument fracture.

Efficacy of D-RaCe and ProTaper Universal Retreatment NiTi instruments and hand files in removing gutta-percha from curved root canals - a micro-computed tomography study.

AIM: To compare the efficacy of two rotary NiTi retreatment systems and Hedström files in removing filling material from curved root canals. METHODOLOGY: Curved root canals of 57 extracted teeth were prepared using FlexMaster instruments and filled with gutta-percha and AH Plus. After determination of root canal curvatures and radii in two directions, the teeth were assigned to three identical groups (n = 19). The root fillings were removed with D-RaCe instruments, ProTaper Universal Retreatment instruments or Hedström files. Pre- and postoperative micro-CT imaging was used to assess the percentage of residual filling material as well as the amount of dentine removal. Working time and procedural errors were recorded. Data were analysed using analysis of covariance and analysis of variance procedures. RESULTS: D-RaCe instruments were significantly more effective than ProTaper Universal Retreatment instruments and Hedström files (P < 0.05). Hedström files removed significantly less dentine than the rotary NiTi systems (P < 0.0001). D-RaCe instruments were significantly faster compared to both other groups (P < 0.05). No procedural errors such as instrument fracture, blockage, ledging or perforation were detected in the Hedström group. In the ProTaper group, four instrument fractures and one lateral perforation were observed. Five instrument fractures were recorded for D-RaCe. CONCLUSIONS: D-RaCe instruments were associated with significantly less residual filling material than ProTaper Universal Retreatment instruments and hand files. Hedström files removed significantly less dentine than both rotary NiTi systems. Retreatment with rotary NiTi systems resulted in a high incidence of procedural errors.

Comparison of flat-panel-detector-based CT and multidetector-row CT in automated volumetry of pulmonary nodules using an anthropomorphic chest phantom.

This study evaluates the accuracy and reproducibility of an experimental flat-panel-detector-based CT scanner (fp-CT) in comparison with those of a 64-slice multidetector row CT (MDCT) in automated pulmonary nodule volumetry. An anthropomorphic chest phantom with 31 spherical nodules (nodule diameters of 2.94-10.01 mm; volumes of 13.24-524.97 mm(3)) was scanned both with an amorphous silicon-based fp-CT scanner, using various tube current and kilovoltage settings, and with a conventional MDCT scanner. Automated nodule volumetry was performed using dedicated software. CT image data were evaluated twice by two independent radiologists. Intra- and inter-observer variations of volumetric measurements were determined and tested using the Kruskal-Wallis test and analysis of variance (fn-ANOVA). The percentage measurement errors (PME) were calculated and differences tested using Wilcoxon signed ranks and Friedman tests. Intraobserver variation was significantly higher for MDCT than for fp-CT (range: p = 0.043-0.045). The measured nodule volumes were significantly greater on fp-CT than on MDCT scans (p<0.001). The PME was significantly greater in fp-CT than in MDCT scans (PME range, 12.35-13.35% for fp-CT scan protocols and 16.87-19.02% for MDCT scan protocols; p<0.0001). The PME increased significantly with reduction of nodule size, and this increase was significantly higher on MDCT than on fp-CT scans (p = 0.0001). The absolute PME was significantly different for nodules of less than 5 mm in diameter (p = 0.0001-0.0033) than for larger nodules. Flat-panel-detector-based CT has advantages over MDCT in accurately determining the volume of pulmonary nodules below 5 mm in diameter.

Effects of low-magnitude, high-frequency mechanical stimulation in the rat osteopenia model.

SUMMARY: In this study, short-term, whole-body vertical vibration at 90 Hz improved trabecular bone quality. There was an improvement of bone quality and density in both osteoporotic and control rats. This treatment may therefore be an attractive option for the treatment of osteoporosis. INTRODUCTION: Aside from pharmacological treatment options, physical exercise is known to augment bone mass. In this study, the effects of whole-body vertical vibration (WBVV) on bone quality and density were evaluated using an osteoporotic rat model. METHODS: Sixty female Sprague Dawley rats were ovariectomized (C) or sham (SHAM) operated at the age of 3 months. After 3 months, both groups were divided into two subgroups that received either WBVV at 90 Hz for 35 days or no treatment. After sacrificing the rats, we evaluated vertebral bone strength, histomorphometric parameters, and bone mineral density (BMD). RESULTS: Treatment with WBVV resulted in improved biomechanical properties. The yield load after WBVV was significantly enhanced. According to yield load and Young's modulus, the treated OVX rats reached the level of the untreated SHAM animals. In all measured histomorphometric parameters, WBVV significantly improved bone density. Treatment with WBVV demonstrated greater effects on the trabecular bone compared to the cortical bone. The ash-BMD index showed significant differences between treated and untreated rats. CONCLUSION: Using WBVV as a non-pharmacological supportive treatment option for osteoporosis demonstrated an enhancement of bone strength and bone mass. This procedure may be an attractive option for the treatment of osteoporosis.

Ectopic bone formation after implantation of a slow release system of polylactic acid and rhBMP-2.

OBJECTIVES: The present study was conducted to test the hypothesis that preshaped polylactic acid (PLA) implants loaded with recombinant human bone morphogenic protein 2 (rhBMP-2) can induce bone formation in a rat ectopic model. MATERIALS AND METHODS: Two groups of porous cylindrical poly-DL-lactic acid implants of 8-mm diameter were produced by gas foaming with CO(2), incorporating 48 and 96 microg rhBMP-2, respectively, into each implant. Blank PLA implants were used as controls. The release of BMPs and the induction of alkaline phosphatase were assessed in vitro. Osteoinduction in vivo was tested by insertion of 15 implants from each group into the gluteal muscles of Wistar rats. Five implants from each group were retrieved after 6, 13 and 26 weeks and assessed using flat panel volume detector computed tomography and light microscopy. RESULTS: Both groups of implants showed increased release of rhBMP-2 during the first 24-48 h, with a slightly higher amount being released from the implants with 48 microg. Release during subsequent intervals was <100 ng/72 h in the low-concentration group and >100 ng in the group with 96 microg rhBMP-2. Implants with 95 microg rhBMP-2 exhibited bone formation in vivo on the outside of the implants across the observation period of 26 weeks with invasion of bone into the pores, whereas implants with 48 microg rhBMP-2 failed to induce the formation of bone tissue. No bone formation was found in the control implants. CONCLUSIONS: The results suggest that release rates of rhBMP-2 for ectopic bone induction have to be >100 ng/72 h to maintain the osteoinductive activity of the tested porous PLA implants. This slow release system may have impact on alveolar bone augmentation procedures when used as individually preformed osteoinductive implants.

[Image-guided minimal-invasive cochlear implantation--experiments on cadavers]. / Navigationsgeführte minimal-invasive Cochlea-Implantation--Untersuchungen am humanen Felsenbein.

BACKGROUND: The accuracy of navigation systems can be improved significantly by using high-resolution flat panel-based Volume Computed Tomography (fpVCT) so that new surgical therapeutic concepts become feasible. A navigation-guided minimally-invasive cochleostomy places highest requirements on the accuracy of intraoperative navigation. METHODS: A flat-panel Volume Computed Tomograph (fpVCT) was used to scan four human temporal bones. The isometric voxel size was 200 microm. The preoperative planning was used to define an optimized drilling channel from the mastoid surface to the round window niche and the scala tympani providing a safety margin to critical anatomical structures such as facial nerve, chorda tympani, sigmoid sinus and posterior wall of auditory canal. The canal was drilled hand-operated with a navigated drill following the previously planned trajectory. Afterwards the drilled canal was imaged by fpVCT. Conventional dissection including mastoidectomy and posterior tympanotomy assured correct localization of the cochleostomy. RESULTS: Path planning took an average of 54 minutes (range 35-85 minutes). Installation took an average of 16 minutes (range 14-19 minutes). The drilling procedure itself took an average of 7.75 min (range 5-12 minutes.) The RMSE-values varied between 0.1 and 0.2 mm (Table 1). All four specimens showed a cochleostomy located at the scala tympani anterior inferior to the round window. The chorda tympani was damaged in one specimen--this was preoperatively planned as a narrow facial recess was encountered. The time needed for planning and system-installation could be reduced continuously. CONCLUSIONS: This feasibility study demonstrates that using current image-guided surgery technology in combination with fpVCT allows drilling of a minimally invasive channel to the cochlea with loco typico cochleostomy. The necessary accuracy of intraoperative navigation can be achieved by use of fpVCT (technical accuracy between 0.1 and 0.2 mm). Our results demonstrate the feasibility of a navigation-guided minimally-invasive cochleostomy loco typico. While we are enthused by this preliminary work, we recognize the barriers which exist in translation to clinical application. These include surgical issues (e.g. control of unexpected bleeding) and electrode issues (e.g. development of insertion tools).

[Determination of renal carcinoma progression in small animals by means of flat-panel volumetric computer tomography]. / Die Erfassung der Progression des Nierenzellkarzinoms in Kleintieren mittels Flachdetektor-Volumen-CT.

PURPOSE: We investigated the feasibility of using flat panel volumetric computer tomography (fpVCT) for the detection of orthotopically implanted renal carcinomas in nude mice. MATERIALS AND METHODS: One million renal cell carcinoma cells [A-498 line (Braunschweig, Germany), in 0.2 ml phosphate-buffered solution (PBS), pH 7.4] were injected into the left kidney of each of the eight nude mice. Each mouse was imaged twice (12 and 16 weeks after implantation) with fpVCT (GE prototype with circular gantry with two 1024 x 1024, 200 microm pixel size, aSi/CsI flat panel detector) after injection of 200 microl contrast medium to check for tumour spread. After 16 weeks the mice were killed and dissected, and the imaging findings in liver, kidneys and lung were compared with the macroscopic findings. RESULTS: No local evidence of tumour or of metastatic spread was seen on fpVCT after 12 weeks in any of the mice. After 16 weeks fpVCT revealed tumour growth in 6 of the 16 kidneys. Two mice had each developed a multifocal renal cell carcinoma and one mouse, a bilateral renal tumour manifestation. In one mouse liver metastases were seen. The fpVCT findings correlated well with the observations recorded in the pathological examination. CONCLUSION: fpVCT is an innovative and noninvasive imaging procedure that can be used for longitudinal investigation of tumour progression following orthotopic implantation of renal cell carcinoma to small animals. The use of a system of this kind will make a decisive contribution to reducing the number of animals used in experimental test projects.

Large scan field, high spatial resolution flat-panel detector based volumetric CT of the whole human skull base and for maxillofacial imaging.

OBJECTIVES: To assess the feasibility of flat-panel detector based volumetric CT (fpVCT) scanning of the whole human skull base and maxillofacial region, which has thus far only been demonstrated on small, excised specimens. Flat-panel detectors offer more favourable imaging properties than image intensifiers. It is therefore likely that they will replace them in cone-beam CT scanners that are currently used to scan parts of the skull base and maxillofacial region. Furthermore, the resolution of current CT imaging limits diagnosis, surgical planning and intraoperative navigation within these regions. fpVCT might overcome these limitations because it offers higher resolution of high contrast structures than current CT. METHODS: Three embalmed cadaver heads were scanned in two scanners: an experimental fpVCT that offers a scan field large enough for a whole human head, and in a current multislice CT (MSCT). 28 structures were compared. RESULTS: Both scanners produced bone images of diagnostic quality. Small high contrast structures such as parts of the ossicular chain and thin bony laminas were better delineated in fpVCT than in MSCT. fpVCT of maxillofacial region and skull base was rated superior to MSCT (P=0.002) as found in this limited, experimental study. CONCLUSIONS: High spatial resolution fpVCT scanning of both regions in a whole human head is feasible and might be slightly superior to MSCT. fpVCT could improve diagnostic accuracy in selected cases, as well as surgical planning and intraoperative navigation accuracy.

In vivo imaging in experimental preclinical tumor research--a review.

The multiparametric molecular cell and tissue analysis in vitro and in vivo is characterized by rapid progress in the field of image generation technologies, sensor biotechnology, and computational modeling. Fascinating new potentials in unraveling the detailed functions of single cells, organs, and whole organisms are presently emerging and permit the close monitoring i.e. tumor development or basic cell development processes with an unprecedented multiplicity of promising investigative possibilities. To answer basic questions of in vivo tumor development and progression fluorescence based imaging techniques provide new insights into molecular pathways and targets. Genetic reporter systems (eGFP, DsRED) are available and high sensitive detection systems are on hand. These techniques could be used for in vitro assays and quantified e.g. by microscopy and CCD based readouts. The introduction of novel fluorescent dyes emitting in the near infrared range (NIR) combined with the development of sensitive detector systems and monochromatic powerful NIR-lasers for the first time permits the quantification and imaging of fluorescence and/or bioluminescence in deeper tissues. Laser based techniques particularly in the NIR-range (like two-photon microscopy) offer superb signal to noise ratios, and thus the potential to detect molecular targets in vivo. In combination with flat panel volumetric computed tomography (fpVCT), questions dealing e.g. with tumor size, tumor growth, and angiogenesis/vascularization could be answered noninvasively using the same animal. The resolution of down to 150 microm/each direction can be achieved using fpVCT. It is demonstrated by many groups that submillimeter resolutions can be achieved in small animal imaging at high sensitivity and molecular specificity. Since the resolution in preclinical small animal imaging is down to approximately 10 microm by the use of microCT and to subcellular resolutions using ( approximately 1 microm) microscope based systems, the advances of different techniques can now be combined to "multimodal" preclinical imaging and the possibilities for in vivo intravital cytometry now become within one's reach.

[Feasibility of flat-panel volumetric computed tomography (fpVCT) in experimental small animal imaging of osteoporosis - initial experience]. / Erste Erfahrungen mit einem Flächendetektor-Volumen-CT (fpVCT) in der experimentellen Osteoporosediagnostik am Kleintiermodell.

BACKGROUND: Flat-panel volumetric computed tomography (fpVCT) is a new, noninvasive CT imaging modality with increased isotropic resolution. Technical details, potential applications, and our initial experience with a fpVCT prototype scanner in the imaging of osteoporosis in a rat model are presented. METHODS: To date, 21 rats have been investigated in vivo with fpVCT. Pharmacologic effects on bone mineral density (BMD) and structure were of special interest. Image evaluation focussed on the second lumbar vertebra and the left femoral bone. To validate measurement results, BMD values calculated with fpVCT were correlated with results of BMD measurements from ashing of the second lumbar vertebra and femoral bones. RESULTS: Our initial results show that fpVCT is capable of detecting differences in BMD between ovariectomized rats treated with estradiol and a control group with high statistical significance (p<0.05), corresponding to ashing as the gold standard. CONCLUSIONS: In a rat model, fpVCT imaging is especially useful in longitudinal in vivo investigations of BMD measures. Spatial resolution of up to 150 microm allows imaging of the trabecular structure only in human cadaveric bones.